The UK’s housing sector has a significant role to play in reducing carbon emissions. As the country works towards its net zero targets, improving the performance of new homes is essential to reducing energy demand, cutting emissions and lowering running costs for residents.

The Future Homes Standard (FHS) is a key part of this transition. Published on 24 March 2026 and coming into force in England on 24 March 2027, it requires new homes to produce at least 75% less carbon than homes built to the 2013 Building Regulations.

While the standard represents a significant change for the housebuilding sector, its purpose is straightforward: creating homes that are better prepared for a low-carbon future.

What is the Future Homes Standard?

The Future Homes Standard is not a standalone document. It is a set of changes to Part L (energy) and Part F (ventilation) of the Building Regulations in England. Wales and Scotland set their own standards, and a companion Future Buildings Standard covers new non-domestic buildings.

From 24 March 2027, new homes will be expected to produce significantly fewer carbon emissions than those built to earlier Building Regulations standards. The approach places greater emphasis on low-carbon heating, efficient services and on-site solar generation, which effectively ends fossil fuel heating in new homes.

For developers, designers and project teams, this means considering operational energy and carbon performance from the earliest stages of a project. Timing is also incredibly important. Transitional arrangements apply building by building (not by site): a building regulations application must be made before 24 March 2027, and work on that building must start before 24 March 2028, for it to remain under the current Part L. For higher risk buildings the dates are 24 September 2027 and 2028.

Why does it matter?

Homes built today will still be in use in 2050. Designing them to higher standards from the outset avoids costly retrofit later, when upgrading heating systems and fabric is far more disruptive and expensive.

The Future Homes Standard supports several important objectives:

  • Reducing operational carbon emissions from housing.
  • Supporting the transition away from fossil fuel heating.
  • Lowering energy consumption and energy bills for residents, particularly through on-site solar generation.
  • Improving comfort and resilience for occupants.
  • Helping the built environment contribute to national net zero targets.

Ultimately, the standard is about ensuring homes built today remain fit for the environmental and energy challenges of tomorrow.

What changes are likely to be required?

Compliance is measured against a notional dwelling, a reference home that sets the targets. While individual design solutions will vary between developments, the notional dwelling includes:

  • High-performance building fabric and insulation, broadly similar to the 2021 notional specification.
  • Improved airtightness.
  • Decentralised mechanical extract ventilation, and wastewater heat recovery in homes of more than one storey.
  • A heat pump or low-carbon heat network in place of a gas boiler.
  • Solar PV, which is now a requirement for most new homes rather than an optional measure. Buildings with a storey 18m or more above ground are exempt.
  • Reduced operational energy demand through better building design.

Rather than relying on a single technology, successful projects will typically consider how multiple elements work together to improve overall building performance. Compliance will initially be demonstrated using SAP 10.3, with the Home Energy Model expected to replace it in due course.

What does this mean for developers and project teams?

The Future Homes Standard reinforces the importance of taking a whole-building approach to sustainability.

Energy performance can no longer be viewed as a compliance exercise undertaken towards the end of the design process. Instead, operational carbon, building fabric performance, services design, roof space for solar PV and plant space for heat pumps and occupant outcomes increasingly need to be considered together from the outset.

This creates opportunities to make informed decisions earlier in the project lifecycle, helping to balance performance, cost, compliance and long-term value. Local planning policy also still applies: councils can set energy standards above the Building Regulations, and in London the draft London Plan goes well beyond Part L.

Looking ahead

The Future Homes Standard represents more than a regulatory change. It reflects a broader shift in how we design and deliver homes.

As expectations around energy performance continue to rise, the focus is moving beyond minimum compliance towards creating buildings that use less energy, emit less carbon and provide better outcomes for those who live in them.

For the housing sector, the challenge is not simply adapting to new requirements but embracing an opportunity to deliver homes that are better prepared for a net zero future. XCO2 supports developers and design teams with Part L compliance, energy strategies and early-stage optioning. Get in touch to discuss your project.